How To Repair The Keyless

How to Repair Keyless Entry on a Chrysler Sebring

by John Smith

Jupiterimages/Polka Dot/Getty Images

The Chrysler Sebring uses a keyless entry organization that is controlled by a wireless remote. You tin can use this keyless entry remote to unlock the doors without having to physically put the key into the Sebring door. However, you can't utilize just whatever keyless remote, as the Sebring comes with a pre-programmed remote. If you buy another one, it must be the same model in order to work. If the remote entry is giving you problems, prepare it by reprogramming the remote to your Sebring.

Step i

Click the "Lock" push on your remote v times, pressing the push button every ii seconds. This will resynchronize the remote. Press a button on the remote to come across if information technology is working again. If non, go along to Step 2.

Step 2

Put the key in the ignition and plow information technology to the "Run" position and look for the ignition sounds to cease. Annotation that the "Run" position is every bit far every bit y'all can twist the key clockwise without cranking the car engine.

Stride 3

Click and hold the "Unlock" button on your remote, then wait 4 seconds.

Footstep 4

Click the "Panic" button on the remote in the iv- to 10-2nd timeframe after pressing the "Unlock" button. Proceed property the "Unlock" push down, and so release both buttons after one second. You volition hear a chinkle to point you have entered the keyless entry programming fashion.

Step 5

Click both the "Lock" and "Unlock" buttons simultaneously on the remote, release both, then click and release but the "Unlock" push button. If a secondary keyless remote is the one not working, repeat this footstep for that remote.

Remove the ignition cardinal and test the keyless entry. If the remote does not respond, you will need to visit a Chrysler dealer to take technicians prepare the arrangement. Or, you might need to replace the remote entirely.

References

Things You lot'll Need

Writer Bio